Filter
Top Products
8-27
ESU00246
Handlebar adjustment
For VT600 / VX600ER
1. Remove the handlebar cover
1
.
2. Loosen the handlebar bolts. Move the handlebar up
or down to adjust the handlebar height to the desired
position.
3. Tighten the handlebar bolts and install the handlebar
cover.
CAUTION
:
@
Make sure that the small gap
a
side of the handlebar
holders faces forward
b
.
@
For MM600 / SX600
1. Remove the handlebar cover
1
.
È
MM600
É
SX600
2. Loosen the handlebar bolts.
Handlebar bolt tightening torque:
23 Nm (2.3 m·kgf, 17 ft·lb)
A
B
E_8DG.book Page 27 Friday, June 29, 2001 4:20 PM