Filter
Top Products
8-16
4. Reinstall the dipstick and fit the loop
4
of the dipstick
handle onto the projection
5
of the gear case.
Chain tension adjustment
1. Loosen locknut.
2. Turn the adjuster bolt clockwise until it is finger tight.
3. Hold the adjuster bolt in place while tightening the
chain adjuster locknut.
1
Locknut
2
Adjuster bolt
ESU00174
Checking the brake pads
Check the brake pads for wear.
If the brake pads reach the wear limit, ask a Yamaha
dealer to replace them.
1
Brake pad wear indicator
ESU00179
Checking the parking brake pads
Check the parking brake pads for wear by measuring the
thickness of the pads.
If the parking brake pads reach the wear limit, ask a
Yamaha dealer to replace them.
Wear limit
a
: 1.5 mm (0.06 in)
Wear limit
a
: 1.0 mm (0.04 in)
E_8DG.book Page 16 Friday, June 29, 2001 4:20 PM