Yamaha SX600G Offroad Vehicle User Manual


 
5-10
ESU00052
Drive guard
The drive guard is designed to cover the V-belt clutch
and V-belt in case parts break or come loose.
WARNING
Make sure that the drive guard is tightened
securely before operating the snowmobile.
Never run the engine with the V-belt or drive
guard removed.
@
ESU00053
V-belt holders
Keep a spare V-belt for emergency use by placing it into
the V-belt holders provided.
CAUTION
:
@
Make sure that the V-belt is installed securely in the
holders.
@
ESU00056
Spark plug holders
Keep spare spark plugs for emergency use by placing
them into the spark plug holders provided.
ESU00057
Carburetor heating lever
The carburetor heating lever controls the flow of coolant
through each carburetor body.
Make sure that the lever is in the ON position to heat
the carburetors while the ambient temperature is below
0 °C (32 °F).
1
Carburetor heating lever
2
ON
3
OFF
CAUTION
:
@
When operating the snowmobile above 0 °C (32 °F),
move the carburetor heating lever to the OFF posi-
tion, since the carburetors do not need to be heated.
@
E_8DG.book Page 10 Friday, June 29, 2001 4:20 PM