Filter
Top Products
Control functions
26
3. Tighten the locknut securely after adjust-
ing the brake lever position.
ESU10581
Parking brake lever
When parking the snowmobile or starting the
engine, apply the parking brake by moving the
parking brake lever to the left.
To release the parking brake, move the park-
ing brake lever to the right.
ESU10593
Shift lever
The shift lever is used to put the snowmobile
into forward or reverse. After coming to a
complete stop, pull the shift lever out, slide it
to “FWD” or to “REV” until it stops, and then
release it.
RS90GT / RS90LTGT / RST90GT
1. Locknut
2. Adjusting bolt
1. Parking brake lever
1. Shift lever
1. Pull out.
2. Slide to “FWD” (forward).
3. Release.
1
1
2
3
U8JA11E0.book Page 26 Monday, June 14, 2010 10:22 AM