Yamaha RST90A Offroad Vehicle User Manual


 
Control functions
13
RST90
ESU14100
Multi-function meter unit
RS90GT / RS90LTGT / RST90GT
The multi-function meter unit is equipped with
the following:
a digital speedometer
a tachometer
an odometer
two tripmeters (which show the distance
traveled since they were last set to zero)
a fuel reserve tripmeter (which shows the
distance traveled since the fuel level warn-
ing indicator and warning light came on)
an oil change tripmeter (which shows the
distance traveled since the periodic oil
change interval was reached)
a clock
warning indicators (which show engine
trouble, coolant temperature, fuel level, and
oil level warnings)
indicator lights (which show high beam and
low coolant temperature conditions)
a warning light (which shows warnings to-
gether with the warning indicators)
a fuel meter (which shows the fuel remain-
ing in the fuel tank)
a grip/thumb warmer level indicator (which
shows the grip warmer level or the thumb
warmer level)
a display brightness control function
When the key is turned to the on position, the
tachometer needle makes one sweep, and
the low coolant temperature indicator light,
the warning light, and all segments of the
meter unit display come on and go off.
The grip warmer level is initially displayed for
5 seconds, then the display switches to the
fuel meter.
TIP
To switch the speedometer, odometer, and
tripmeter displays between kilometers and
miles, select the odometer mode ODO, and
then push the SELECT button for at least 10
seconds while the snowmobile is stopped.
1. Warning light “”
2. Engine trouble warning indicator “”
3. Two-digit code 84
1. RESET button
2. SELECT button
3. Tachometer
4. Warning indicators
5. Clock
6. Low coolant temperature indicator
light “”
7. High beam indicator light “”
8. Warning light “”
9. Meter display
FHI
E LO
9
6
8
12 3 4 5
7
U8JA11E0.book Page 13 Monday, June 14, 2010 10:22 AM