Yamaha FZS1000TC Utility Trailer User Manual


 
PERIODIC MAINTENANCE AND MINOR REPAIR
6-37
6
EAU24201
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw.
CAUTION:
ECA11190
Do not overtighten the screw, other-
wise the lens may break.
EAU24360
Front wheel
EAU33680
To remove the front wheel
WARNING
EWA10820
It is advisable to have a Yamaha
dealer service the wheel.
Securely support the motor-
cycle so that there is no danger
of it falling over.
1. Place the motorcycle on the cen-
terstand.
2. Loosen the front wheel axle pinch
bolt, then the wheel axle and the
brake caliper bolts.
3. Remove the brake hose holder
and reflector on each side by re-
moving the bolts.
4. Remove the brake caliper on each
side by removing the bolts.
CAUTION:
ECA11050
Do not apply the brake after the
brake calipers have been removed,
otherwise the brake pads will be
forced shut.
5. Pull the wheel axle out, and then
remove the wheel.
1. Screw
1. Wheel axle
2. Front wheel axle pinch bolt
1. Reflector
2. Brake hose holder
3. Brake caliper bolt
4. Brake caliper
U1C210E0.book Page 37 Tuesday, September 21, 2004 1:28 PM