Filter
Top Products
PERIODIC MAINTENANCE AND MINOR REPAIR
6-36
6
5. Install the headlight bulb cover,
and then connect the coupler.
6. Install the panel.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
EAU24160
Replacing a tail/brake light
bulb
1. Remove the seat. (See page
3-10.)
2. Remove the tail/brake light bulb
cover.
3. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
4. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
5. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
6. Install the socket (together with the
bulb) by turning it clockwise.
7. Install the bulb cover.
8. Install the seat.
1. Tail/brake light bulb cover
1. Tail/brake light bulb socket
U1C210E0.book Page 36 Tuesday, September 21, 2004 1:28 PM