Filter
Top Products
Control functions
16
ESU13032
Shift lever
The shift lever is used to put the snowmobile
into forward or reverse. Before shifting, wait
for the snowmobile to come to a complete
stop with the engine idling. Pull the shift lever
out, slide it to “FWD” or to “REV” until it stops,
and then push it back in.
NOTICE
ECS00072
Do not use the shift lever while the snow-
mobile is moving, otherwise the drive train
could be damaged.
ESU10722
Shroud and covers
Securely fasten the shroud and covers before
operating the snowmobile. (See page 44 for
removal and installation procedures.)
1. Shift lever
1. Pull out.
2. Slide to “FWD” (forward).
3. Push in.
1. Pull out.
2. Slide to “REV” (reverse).
3. Push in.
1. Shroud
2. Right side cover
1
2
U8HK10E0.book Page 16 Tuesday, June 10, 2008 1:58 PM