Filter
Top Products
Periodic maintenance and adjustment
67
ESU12852
Replacing a headlight bulb
1. Remove the shroud. (See page 44 for re-
moval procedures.)
2. Disconnect the headlight coupler.
3. Remove the bulb holder cover.
4. Unhook the headlight bulb holder, and
then remove the burnt-out bulb.
5. Install the new bulb, and then hook the
bulb holder onto the headlight unit.
NOTICE: Keep oil and your hands
away from the glass part of the bulb or
its life and illumination will be affect-
ed. If the glass is oil stained, thor-
oughly clean it with a cloth moistened
with alcohol or lacquer thinner.
[ECS00621]
6. Install the bulb holder cover, and then
connect the headlight coupler.
7. Install the shroud.
ESU12861
Adjusting the headlight beams
1. Remove the shroud. (See page 44 for re-
moval procedures.)
2. Turn the headlight beam adjusting screw
in or out to adjust the headlight beams.
To lower the headlight beams, turn the
headlight beam adjusting screw in direc-
tion (a). To raise the headlight beams,
turn the headlight beam adjusting screw
in direction (b).
1. Lubrication point
1. Headlight coupler
2. Bulb holder cover
1. Bulb holder
1. Do not touch the glass part of the bulb.
Bulb type:
Halogen bulb
U8GL11E0.book Page 67 Friday, June 20, 2008 6:51 PM