Filter
Top Products
Control functions
17
NOTICE
ECS00072
Do not use the shift lever while the snow-
mobile is moving, otherwise the drive train
could be damaged.
ESU10722
Shroud and covers
Securely fasten the shroud and covers before
operating the snowmobile. (See page 44 for
removal and installation procedures.)
ESU12733
Drive guard
WARNING
EWS00401
● Coming in contact with the rotating V-
belt or clutch parts can cause severe in-
jury or death. Never run the engine with
the drive guard removed.
● Make sure that the drive guard is tight-
ened securely before operating the
snowmobile to protect against severe
injury or death from a broken V-belt or
other part should it come off the snow-
mobile while it is in operation.
NOTICE
ECS00830
Never run the engine with the V-belt re-
moved. Clutch components can be dam-
aged.
The drive guard is designed to protect the V-
belt clutch and V-belt in case parts break or
come loose.
The drive guard is located behind the left side
cover. (See page 44 for removal procedures.)
1. Pull out.
2. Slide to “REV” (reverse).
3. Push in.
1. Shroud
2. Right side cover
1
2
1. Left side cover
1
U8GL11E0.book Page 17 Friday, June 20, 2008 6:51 PM