Filter
Top Products
Control functions
16
3. Tighten the locknut securely after adjust-
ing the brake lever.
ESU10581
Parking brake lever
When parking the snowmobile or starting the
engine, apply the parking brake by moving the
parking brake lever to the left.
To release the parking brake, move the park-
ing brake lever to the right.
ESU13032
Shift lever
The shift lever is used to put the snowmobile
into forward or reverse. Before shifting, wait
for the snowmobile to come to a complete
stop with the engine idling. Pull the shift lever
out, slide it to “FWD” or to “REV” until it stops,
and then push it back in.
1. Locknut
2. Adjusting bolt
1. Parking brake lever
1. Shift lever
1. Pull out.
2. Slide to “FWD” (forward).
3. Push in.
U8GL11E0.book Page 16 Friday, June 20, 2008 6:51 PM