Filter
Top Products
PERIODIC MAINTENANCE AND MINOR REPAIR
6-37
6
6. Install the passenger seat.
EAU24310
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
2. Remove the socket (together with
the bulb) by pulling it out.
3. Remove the defective bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by pushing it in.
6. Install the license plate light unit by
installing the screws.
1. Screw
2. License plate light unit
1. License plate light bulb
U3P612E0.book Page 37 Tuesday, October 16, 2007 9:14 AM