Yamaha FJR13AX(C) Automobile User Manual


 
INSTRUMENT AND CONTROL FUNCTIONS
3-6
3
will start flashing. If this occurs, have a
Yamaha dealer check the electrical cir-
cuit.
Coolant temperature meter
With the key in the ON position, the
coolant temperature meter indicates
the temperature of the coolant. When
the key is turned to ON, all of the dis-
play segments of the coolant tempera-
ture meter will appear one after the
other and then disappear in order to
test the electrical circuit. The coolant
temperature varies with changes in the
weather and engine load. If the top seg-
ment flashes, stop the vehicle and let
the engine cool. (See page 6-39.)
CAUTION:
ECA10020
Do not operate the engine if it is
overheated.
Transmission gear display
This display shows the selected gear.
The neutral position, however, is not
displayed, it is indicated by the neutral
indicator light.
Ambient temperature, instanta-
neous fuel consumption and aver-
age fuel consumption modes
Push the RESET button to switch the
display between the ambient tempera-
ture mode Air, the instantaneous fuel
consumption mode MPG and the av-
erage fuel consumption mode AV_ _._
MPG in the following order:
Air MPG AV_ _._ MPG Air
1. Coolant temperature meter
1. Transmission gear display
2. Neutral indicator light “”
1. Ambient temperature/instantaneous fuel
consumption/average fuel consumption
2. SELECT button
3. RESET button
U3P612E0.book Page 6 Tuesday, October 16, 2007 9:14 AM