Filter
Top Products
INSTRUMENT AND CONTROL FUNCTIONS
3-19
3
EAU39480
Accessory box
The accessory box is located beside
the meter panel.
To open the accessory box
1. Insert the key into the main switch,
and then turn it to “ON”.
2. Push the accessory box button,
and then open the accessory box
lid.
3. Turn the key to “OFF” to preserve
the battery.
To close the accessory box
1. Fold the accessory box lid down.
2. Remove the key.
CAUTION:
ECA11800
Do not place heat-sensitive items in
the accessory box. The accessory
box gets extremely hot especially
when the engine is running or is hot.
WARNING
EWA11421
● Do not exceed the load limit of
0.3 kg (0.66 lb) for the accessory
box.
● Do not exceed the maximum
load of 211 kg (465 lb) (CAL)
212 kg (467 lb) (U49) for the ve-
hicle.
EAU39611
Adjusting the headlight
beams
The headlight beam adjusting knobs
are used to raise or lower the height of
the headlight beams. It may be neces-
sary to adjust the headlight beams to
increase visibility and help prevent
blinding oncoming drivers when carry-
ing more or less load than usual. Obey
local laws and regulations when adjust-
ing the headlights.
To raise the headlight beams, turn the
knobs in direction (a). To lower the
headlight beams, turn the knobs in di-
rection (b).
1. Accessory box lid
2. Accessory box
3. Accessory box button
1. Headlight beam adjusting knob
U3P612E0.book Page 19 Tuesday, October 16, 2007 9:14 AM