Filter
Top Products
INSTRUMENT AND CONTROL FUNCTIONS
3-21
3
2. Push the cowling to the closed po-
sition, and then install the quick
fastener screws.
NOTE:
Make sure that the cowling is properly
installed before riding.
EAU39671
Rear view mirrors
The rear view mirrors of this vehicle can
be folded forward or backward for park-
ing in narrow spaces. Fold the mirrors
back to their original position before
riding.
WARNING
EWA14371
Be sure to fold the rear view mirrors
back to their original position before
riding.
EAU14731
Adjusting the front fork
This front fork is equipped with spring
preload adjusting bolts, rebound damp-
ing force adjusting knobs and compres-
sion damping force adjusting screws.
WARNING
EWA10180
Always adjust both fork legs equal-
ly, otherwise poor handling and loss
of stability may result.
Spring preload
To increase the spring preload and
thereby harden the suspension, turn
the adjusting bolt on each fork leg in di-
rection (a). To decrease the spring pre-
1. Quick fastener screw
1. Closed position
1. Riding position
2. Parking position
1. Spring preload adjusting bolt
U3P612E0.book Page 21 Tuesday, October 16, 2007 9:14 AM