Filter
Top Products
7-22
7
If you start to roll backwards, DO NOT apply either
brake abruptly. If you are in 2WD, apply only the
front brake. If you are in 4WD, because all wheels
are interconnected by the drive train, applying ei-
ther brake will brake all wheels, therefore, avoid
sudden application of either the front or rear brake
as the wheels on the uphill side could come off the
ground. The ATV could easily tip over backwards.
Apply both the front and rear brakes gradually, or
dismount the ATV immediately on the uphill side.
WARNING
EWB01361
POTENTIAL HAZARD
Stalling, rolling backwards or improperly dis-
mounting while climbing a hill.
WHAT CAN HAPPEN
Could result in ATV overturning.
HOW TO AVOID THE HAZARD
Maintain a steady speed when climbing a
hill.
If you lose all forward speed:
● Keep weight uphill.
● Apply the brakes.
● Shift to the park position after you are
stopped.
If you begin rolling backwards:
● Keep weight uphill.
● 2WD: Never apply the rear brake while roll-
ing backwards. Apply the front brake.
When fully stopped, shift to the park posi-
tion.
● 4WD: Apply both front and rear brakes
gradually. When fully stopped, shift to the
park position.
Dismount on uphill side or to a side if point-
ed straight uphill. Turn the ATV around and
remount, following the procedure described
in the Owner’s Manual.
U1P113E0.book Page 22 Friday, May 19, 2006 9:10 AM