Filter
Top Products
8-17
8
6. Insert the dipstick into the filler hole (without
screwing it in), and then remove it again to
check the oil level.
NOTE:
The engine oil should be between the minimum
and maximum level marks.
7. If the engine oil is at or below the minimum
level mark, add sufficient oil of the recom-
mended type to raise it to the correct level.
8. Insert the dipstick into the oil filler hole, and
then tighten the engine oil filler cap.
9. Install the panel.
1. Engine oil filler cap 1. Dipstick
2. Maximum level mark
3. Minimum level mark
U1P113E0.book Page 17 Friday, May 19, 2006 9:10 AM