Filter
Top Products
8-53
8
4. Install a new headlight bulb holder assembly
by inserting it into the headlight unit and turn-
ing it clockwise.
CAUTION:
ECB00650
Do not touch the glass part of the headlight
bulb to keep it free from oil, otherwise the
transparency of the glass, the luminosity of the
bulb, and the bulb life will be adversely affect-
ed. Thoroughly clean off any dirt and finger-
prints on the headlight bulb using a cloth
moistened with alcohol or thinner.
5. Connect the headlight coupler.
6. Install the headlight bulb holder cover at the
rear of the headlight.
CAUTION:
ECB00670
Make sure the headlight bulb holder cover is
securely fitted over the bulb holder and seated
properly.
7. Adjust the headlight beam if necessary.
EBU25550
Adjusting a headlight beam
CAUTION:
ECB00690
It is advisable to have a Yamaha dealer make
this adjustment.
WHAT CAN HAPPEN
You can be burned, or a fire could start if the
bulb touches something flammable.
HOW TO AVOID THE HAZARD
Wait for the bulb to cool before touching or
removing it.
1. Do not touch the glass part of the bulb.
U1P113E0.book Page 53 Friday, May 19, 2006 9:10 AM