14
Whistler WGPX-635/650
Secure Digital (SD) Card
Inserting the SD card:
Note: The SD card may already be inserted into the unit and the following step may not be
required.
Insert the memory card as shown below: With the metal contacts of the memory card facing back,
insert the card into the slot on the left side of the unit (as shown below). Gently press until it locks
in place.
Secure Digital Card (SD) Info.
Standard SD/MMC
type memory card.
SD shown
unlocked
Removing the SD card:
1. Gently press the top of the memory card, and the card will
eject automatically.
2. Then gently pull the memory card to remove.
Note:
• The included memory card contains the digital map files
that are required for the GPS navigation data. Please do
not delete.
• When removing the memory card, please make sure the
card is not reading data, or it will cause a system crash.
• Do not set the SD memory card as write protected (locked)
or the system will not operate properly.
Note: Remove SD card
with unit off and the
power cord unplugged.
Figures shown for explanation only - not representative of the actual unit!