Filter
Top Products
03 Your driving environment
Ignition modes
03
86
* Option/accessory, for more information, see Introduction.
Inserting and removing the remote key
Ignition slot with remote key and START/STOP
ENGINE button.
Inserting the remote key
1
Holding the end of the remote key with the
base of the key blade, insert the remote key
into the ignition slot as shown in the illustration
and press it in as far as possible (past the
detent).
CAUTION
Foreign objects in the ignition slot can
impair function or cause damage.
Removing the remote key
The remote key can be removed from the igni-
tion slot by pulling it out.
Ignition modes
Ignition mode 0
±
Insert the remote key in the ignition slot and
press it in as far as possible
1
.
Ignition mode I
NOTE
To access ignition modes I or II without star-
ting the engine, the brake pedal must not be
depressed.
±
With the remote key fully pressed into the
ignition slot
1
, press START/STOP
ENGINE briefly.
Ignition mode II
±
With the remote key fully pressed into the
ignition slot
1
, press START/STOP
ENGINE for approximately 2 seconds.
Returning to mode I from mode II
With the remote key fully pressed into the igni-
tion slot
1
, press START/STOP ENGINE briefly.
Returning to mode 0 from mode I
Open the driver's door.
Ignition mode functions
The various ignition modes are accessed with
the remote key in the ignition slot
1
.
Posi-
tion
Function
0
Odometer, clock and tempera-
ture gauge are illuminated. The
infotainment system can be
used.
I
The steering lock is deactivated.
Moonroof*, power windows,12-
volt sockets, navigation system*,
climate system blower, ECC,
windshield wipers can be used.
II
The headlights/taillights come
on. Warning/indicator lights
come on for 5 seconds. All equip-
ment operates apart from heated
seats* and rear window
defroster, which only work when
the engine is running.
1
Not necessary in vehicles with the optional keyless drive.