Filter
Top Products
08 Maintenance and specifications
Replacing bulbs
08
``
* Option/accessory, for more information, see Introduction.
311
Trunk lighting
G021758
NOTE
Before starting to replace a bulb, see
page 306.
The trunk lighting is located on opposite sides
of the trunk.
1. Insert a screwdriver and gently turn so that
the bulb housing comes loose.
2. Replace the bulb.
3. Check that the bulb illuminates and press
it back into the bulb housing.
Vanity mirror lighting
Removing the mirror glass
1. Insert a screwdriver underneath the lower
edge, in the center, turn and carefully pry
up the lug on the edge.
2. Carefully detach and lift out the entire mir-
ror glass.
3. Replace the bulb.
Reinstalling the mirror glass
1. Press the three lugs at top edge of the mir-
ror glass back into position.
2. Press the three lower lugs back into posi-
tion.
Bulb specifications
Lighting func-
tion
Wat-
tage
Bulb
Extra high beam
(models with Active
Bending Lights*)
55 H7 LL
Low beam (halo-
gen)
55 H11 LL
High beam (halo-
gen)
65 H9
Front turn signals 21 HY21W
License plate light-
ing
5 C5W LL
Vanity mirror light-
ing
1.2 W2x4.6d
type T5
Glove compart-
ment lighting
5 SV8.5
(length
43mm)
Rear turn signals 21 PY21W SV
Rear fog light 21 H21W LL
Backup light 21 H21W LL