Filter
Top Products
8
W6202pr-0920
• With the large opening in the steering wheel upright,
fit the curved end of the steering column down into
the large hole in the windshield.
• Continue to insert the curved end of the steering
column through slot in the floor of the vehicle.
Curved End of
Steering Column
Large Opening
Windshield
Large Hole
Small Slot
2
DASH VIEW
• Turn the vehicle on its side, so that the bottom
faces you.
• Position the steering bracket behind the steering linkage,
as shown.
• Fit the steering column through the hole in the steering
bracket. Make sure the second bend in the end of
the steering column is through the hole in the
steering bracket.
• Fit the end of the steering column through the hole in
the steering linkage
A
.
• Turn the steering bracket and fit it into place
B
behind
the front edge of the vehicle.
Steering Linkage
#10 x
¾" (1,9 cm) Screw
Steering Bracket
Steering
Bracket
A
B
Steering
Linkage
Steering
Column
ASSEMBLY
3
4
BOTTOM VIEW
• Insert a #10 x ¾" (1,9 cm) screw through the front end
of the vehicle and through the hole in the bracket.
• Attach the #10 lock nut to the end of the screw.
• While holding the lock nut in place with an adjustable
wrench, tighten the screw.
#10 Lock Nut
Screw
Lock Nut
5