VIVOTEK
User's Manual - 171
(It will be replaced by audio_mic and
audio_extmic.)
audio_lineout <boolean> 1 0/99 Indicate whether to support line
output.
audio_headphoneout <boolean> 0 0/99 Indicate whether to support
headphone output.
audioin_codec aac4, gamr,
g711
<product
dependent>
aac4, gamr,
g711
0/99 Available codec list for audio input.
camctrl_httptunnel <boolean> 0 0/99 Indicate whether to support
httptunnel.
camctrl_httptunnelclient <boolean> 0 0/99 Indicate whether to support
httptunnel client.
camctrl_privilege <boolean> 1 0/99 Indicate whether to support “Manage
Privilege” of PTZ control in the
Security page.
1: support both
/cgi-bin/camctrl/camctrl.cgi and
/cgi-bin/viewer/camctrl.cgi
0: support only
/cgi-bin/viewer/camctrl.cgi
uart_httptunnel <boolean> 0 0/99 Indicate whether to support HTTP
tunnel for UART transfer.
transmission_mode Tx,
Rx,
Both
Tx 0/99 Indicate transmission mode of the
machine: TX = server, Rx = receiver
box, Both = DVR.
network_wire <boolean> 1 0/99 Indicate whether to support Ethernet.
network_wireless <boolean> 0 0/99 Indicate whether to support wireless.
derivative_brand <boolean> 1 0/99 Indicate whether to support the
upgrade function for the derivative
brand. For example, if the value is
true, the VVTK product can be
upgraded to VVXX. (TCVV<->TCXX is
excepted)
npreset 0, <positive
integer>
20 0/99 Number of preset locations
eptz 0, <positive
integer>
3 0/99 A 32-bit integer, each bit can be set
separately as follows: