Filter
Top Products
15
©
2000 Directed Electronics, Inc.
chirps are heard, a zone was triggered so many times that Nui-
sance Prevention
®
Circuitry has bypassed that zone. In either case,
the status LED will indicate which zone was involved (see Table of
Zones section). The system will retain this information in its
memory, and continue to chirp four or five times each time it is
disarmed, until the next time the ignition key is turned on.
The zone number is the number of LED flashes used by the system
to identify that input. The standard input assignments are listed
below, along with spaces to write in any optional sensors or
switches you have had installed.
ZONE
(Number of DEALER-INSTALLED
LED Flashes) DESCRIPTION OPTIONS
1
Instant trigger - often used
for hood/trunk pinswitches
2 Instant trigger - a heavier impact
detected by the Double Guard
®
Shock Sensor
3 Door switch trigger
4 Multiplex - second stage trigger
5 Ignition trigger
If the Warn Away
®
response is triggered, the LED will not report it.
Table of Zones