Filter
Top Products
10
©
2000 Directed Electronics, Inc.
if a vehicle door has not been opened. Rearming will take place
regardless of whether the system has been programmed for active
locking/arming or passive locking/arming.
This feature allows you to temporarily disarm the security system
without the transmitter should it be lost or damaged. In order to
disarm without a transmitter, you must have the siren key and know
where the siren is located. Be sure to check with the installer for
the location of the siren, which is required to disarm the system.
To temporarily disarm the system without the transmitter:
1. Open the vehicle hood
and locate the siren in
the engine compartment.
2. Remove the water pro-
tective cap on the back
of the siren to expose
the siren lock switch.
3. Insert the siren key into the siren lock switch and turn to the
OFF position. The security system and security interrupts
should now disarm.
When the system is disarmed with the siren lock switch, all the
system’s features are still operational, but the siren will not sound.
To reactivate the siren:
1. Turn the siren key back to the ON position.
2. Replace the water protective cap on the back of the siren.
Disarming Without a Transmitter