Filter
Top Products
8
©
2000 Directed Electronics, Inc.
Multi-Level Security Arming allows you to select which of the
security system's inputs or sensors will be active and which will be
bypassed at the time that the system is armed. (See the Table of
Zones section.) Pressing again within five seconds of arming
the security system will activate the Multi-Level Security
Arming feature. Each time is pressed again, a different secu-
rity level is selected. The different security levels can be selected
as follows:
■ Pressing one time: The siren chirps once. The system is
armed.
■ Pressing a second time within five seconds: The siren
chirps twice followed by a long chirp. Zone Two is now
bypassed.
■ Pressing a third time within five seconds: The siren chirps
three times followed by a long chirp. Zone Four is now
bypassed.
■ Pressing a fourth time within five seconds: The siren
chirps four times followed by a long chirp. Zones Two and
Four are now bypassed.
■ Pressing a fifth time within five seconds: The siren chirps
five times followed by a long chirp. All input zones, except
the ignition, are now bypassed.
NOTE: Multi-Level Security Arming only applies to a single arming cycle.
Once the system is disarmed and then rearmed, all the zones will be
active again.
Multi-Level Security Arming