Filter
Top Products
REMOVE THE FOLLOWING:
REMOVE DASH PAD, INSTRUMENT PANEL, PASSENGER SIDE PANEL AND LOWER PASSENGER SIDE
DASHBOARD (RETAIN SCREWS) SEE FIGURE 1.
GLOVE BOX (RETAIN) SEE FIGURE 1.
HEATER ASSEMBLY AND ALL RELATED DUCTING (DISCARD), RETAIN SCREWS.
SEE FIGURE 2.
CONTROL PANEL ASSEMBLY (RETAIN CONTROL PANEL) SEE FIGURE 1.
REFER TO CONTROL PANEL CONVERSION KIT INSTRUCTIONS FOR INSTALLATION OF CONTROLS.
REMOVE OEM DEFROST DUCT ASM SEE FIGURE 2.
NOTE: REMOVAL OF DASHBOARD REQUIRED TO INSTALL THE EVAPORATOR. VINTAGE AIR
RECOMMENDS THAT YOU UTILIZE THE FACTORY SERVICE MANUAL WHEN YOU DISASSEMBLE
AND REASSEMBLE THE DASHBOARD.
PASSENGER COMPARTMENT
GLOVE
BOX
PASSENGER SIDE
PANEL
LOWER PASSENGER
SIDE DASHBOARD
DASH PAD
6
1969-70 MUSTANG w/o AC GEN IV
CONTROL
PANEL
INSTRUMENT
PANEL
DEFROST DUCT
ASM
HEATER
ASSEMBLY
FIGURE 2
FIGURE 1
ENGINE COMPARTMENT
BATTERY (RETAIN).
DRAIN RADIATOR
HEATER HOSES(DISCARD).
REMOVE THE FOLLOWING:
CONDENSER ASSEMBLY & INSTALLATION
REFER TO SEPARATE INSTRUCTIONS INCLUDED WITH
THE CONDENSER KIT TO INSTALL THE CONDENSER.
BINARY SWITCH INSTALLATION ( REFER TO CONDENSER INSTRUCTIONS)
REFER TO SEPARATE INSTRUCTIONS INCLUDED WITH THE
BRACKET KIT TO INSTALL THE COMPRESSOR BRACKET.
COMPRESSOR & BRACKETS
BEFORE STARTING THE INSTALLATION, CHECK THE FUNCTION
OF THE VEHICLE (HORN, LIGHTS,ETC.) FOR PROPER OPERATIONS.
STUDY THE INSTRUCTIONS, ILLUSTRATIONS, & DIAGRAMS.
901271 REV A 2/11/08, 69-70 MUSTANG w/o AC GEN IV EVAP INSTR PG 6 OF 26