Filter
Top Products
23
LCD Backlight
The LCD Backlight comes on when the power is applied. In Scan Mode and Manual Mode, the
backlight stays on bright continuously. In the other modes, the backlight stays bright for ten
seconds and then switches to dim. Press any key and the display switches back to bright for ten
seconds.
Programming Radio AM/FM Frequencies
Before you can use the Radio Mode, you must program the channels with your favourite radio
stations. You can program up to 20 stations (10 AM/10 FM). Follow these steps:
Example: Program FM Channel 9 with 92.5000 MHz.
1. Press RADIO AM/FM to enter into the
Radio Mode. (The initial default setting is FM
Channel 1 with 000.0000 MHz for the
frequency). The RADIO and FM icons appear
in the display.
2. To select the channel (9), press 9 on
the numeric keypad.
Press 0 to select channel 10.
SEARCHLIMIT/ HOLD/
ADDITIONAL FEATURES