Filter
Top Products
17
To Set the Priority Channel
Your UBC248CLT has one default Priority Channel per bank. Each priority channel is, set at
the first channel in the bank. To change the priority channel determine the frequency most
important to you and program it into the desired channel location.
Example: To set Channel 5 as the priority channel.
1. Press MANUAL to exit the Scan Mode.
2. Press 5 and MANUAL for direct
channel access. Or select channel 5
using the ▼ or ▲ keys.
3. Press and hold PRIORITY.
The
PRI
indicator appears in
the display and P appears to the
left of the selected channel.
To enter the Priority Scan Mode
When in Scan or Manual mode, press PRIORITY. The
PRI
indicator appears in the display.
To exit the Priority Scan Mode
Momentarily press PRIORITY again. The
PRI
indicator goes out.
SEARCHLIMIT/ HOLD/
SEARCHLIMIT/ HOLD/
SEARCHLIMIT/ HOLD/