Trimble Outdoors R8 GPS Receiver User Manual


 
3 Setting up the Receiver
30 Trimble R7/R8 GPS Receiver User Guide
Trimble R7 Operation
3.1 Other System Components
This section describes optional components that you can use with the
Trimble R7 receiver.
31.1 Radios
Radios are the most common data link for Real-Time Kinematic
(RTK) surveying. The Trimble R7 receiver is available with an
optional internal radio in either the 450 or 900 MHz UHF bands. You
can also connect an external radio to Port 3, whether the internal radio
is installed or not.
The Trimble R7 supports the following Trimble base radios when
using the internal receiver radio:
•TRIMMARK 3
TRIMMARK IIe
TRIMTALK™ 450S
SiteNet™ 450
SiteNet 900
Trimble R8 internal transmitter (base)