Filter
Top Products
3 Setting up the Receiver
14 Trimble R7/R8 GPS Receiver User Guide
Trimble R7 Operation
32.2 Rear panel
Figure 3.3 shows the rear panel of the Trimble R7. This panel contains
a slot for attaching the receiver catch lock, and the catches for the two
battery compartments on the bottom panel. The catch lock should
already be attached to your receiver.
Figure 3.3 Rear panel
To mount the receiver on a pole, you need to attach the receiver
bracket to the pole and insert the catch lock into the bracket. For more
information, see Pole-Mounted Setup, page 22.
compartment
Receiver
catch lock
Battery
catches