Filter
Top Products
9 Default Settings
90 Trimble R7/R8 GPS Receiver User Guide
Trimble R7 Operation
94.5 Application files
You can use application files to change the settings in the receiver.
Sending an application file to the receiver does not necessarily apply
the file’s settings; you can apply a file’s settings at any time after
sending it to the receiver. You can also define timed application files.
A timed application file contains receiver settings, but also includes a
date and time when it is automatically activated.
If there is a timed application file on the Trimble R7, the receiver
automatically applies the file’s settings and begins logging (if logging
settings are included in the file) at the specified time. If the receiver is
in Sleep mode, it wakes up five minutes before the start time of the
timed application file, and then begins logging, if required, at the
specified start time.
When you send an application file to
the receiver and …
then the receiver settings are changed …
you apply the file’s settings immediately as soon as you send the file to the receiver
you apply the file later as soon as you apply the file
it is a timed application file at the specified activation time