15
1. NORMALLY
OPEN
Opens and
closes circuits,
thereby
stopping (1) or
allowing (2)
current flow.
RESISTOR
An electrical component with a
fixed resistance, placed in a circuit
to reduce voltage to a specific
value.
RESISTOR, TAPPED
A resistor which supplies two or
more different non–adjustable
resistance values.
SENSOR (Thermistor)
A resistor which varies its
resistance with temperature.
SHORT PIN
Used to provide an unbroken
connection within a junction block.
SOLENOID
An electromagnetic coil which
forms a magnetic field when
current flows, to move a plunger,
etc.
SWITCH, DOUBLE THROW
A switch which continuously
passes current through one set
of contacts or the other.
SWITCH,
IGNITION
A key operated switch with
several positions which allow
various circuits. Particularly the
primary ignition circuit, to
become operational.
Wires are always
drawn as straight
lines on wiring
diagrams. Crossed
wires (1) without a
black dot at the
junction are not
joined;
crossed wires (2)
with a black dot at
the junction are
spliced (joined)
connections.
RELAY, DOUBLE THROW
A relay which passes current
through one set of contacts or the
other.
SENSOR, ANALOG SPEED
Uses magnetic impulses to open
and close a switch to create a
signal for activation of other
components.
TRANSISTOR
A solidstate device typically used
as an electronic relay; stops or
passes current depending on the
applied voltage at “base.”
SWITCH, WIPER PARK
Automatically returns wipers to
the stop position when the wiper
switch is turned off.
SWITCH, MANUAL
SPEAKER
An electromechanical device
which creates sound waves from
current flow.
2. NORMALLY
CLOSED
RESISTOR, VARIABLE or
RHEOSTAT
A controllable resistor with a
variable rate of resistance.
Also called a potentiometer or
rheostat.
2. NORMALLY
OPEN
RELAY
1. NORMALLY
CLOSED
Basically, an electrically
operated switch which may
be normally closed (1) or
open (2).
Current flow through a
small coil creates a
magnetic field which either
opens or closes an
attached switch.
(2) SPLICED
WIRES
(1) NOT
CONNECTED