Filter
Top Products
12
TROUBLESHOOTING
HOW TO REPLACEMENT FOR TERMINAL
(with Terminal Retainer Type)
1. DISCONNECT CONNECTOR
2. DISCONNECT TERMINAL FROM CONNECTOR
(a) “for A type”
Raise the terminal retainer up to the temporally lock
position.
HINT: The needle insertion position varies according
to the connector’s shape (number of terminals
etc.), so check the position before inserting it.
“for B type”
Open the terminal retainer.
(b) Release the locking lug from terminal and pull the
terminal out from rear.
3. INSTALL TERMINAL TO CONNECTOR
(a) Insert the terminal.
HINT:
1. Make sure the terminal is positioned correctly.
2. Insert the terminal until the locking lug locks firmly.
3. Insert the terminal with terminal retainer in the
temporally lock position.
(b) Push the terminal retainer in to the full lock position.
4. CONNECT CONNECTOR