Filter
Top Products
In normal operation, there will be no need to use the USB port and cable.
However, should it become necessary, you can connect the device to the
computer using the USB cable. One end connects with PC and the other
end connects with the device. 1. Data transmission: There are two new
“mobile Disk” icons in my computer. After the device is successfully
connected with the computer, the first icon represents the built-in flash drive;
the second represents the SD card storage.
(If the SD card is not inserted, the second disk icon is unavailable). Then,
you can use them as normal USB flash disks, with such functions as
copying and editing the data between computer and device.
-9- -10-
4.Function operation
4.1.1 The Features of Navigation
4.1.2 Use of Navigation
Music
Caution
Caution
1.Do not erase or change the data in the
built-in flash memory. This may cause a malfunction.
2. This system is based on Windows 98 operating system.
Install the driver before operating the device. The
communication between GPS and computer are based
on the Windows 98 operating system or above.
3.When GPS is connected to a computer by USB cable,
other device functions will not work.
2. Safely Remove: After logging out the system, remove the USB cable
(it operates like the USB flash disk).
The device employs the intelligent navigation system, which uses a GPS
satellite signal receiver to position the moving vehicle precisely and display the
mobile vehicle's location on the E-map. The system will automatically calculate
the best route when users set the destination. The system can also provide the
functions of visual maps, instant animation, and voice instruction.
The device supports navigation, audio playing, video playing, E-book, photo
browsing,and system setting functions. The main menu after starting up is
as follows;
Read the navigation software instructions carefully.
1. Click MUSIC icon on the main menu to enter into the audio folder.
Then you will find a menu that shows "SD/"MMC or "Flash" folder. Double-click
the folder to play the related file.
The function of each icon is as follows:
ReturnReturn to the main menu
PreviousDisplay the previous page
NextDisplay the next page
UpReturn to the upper level folder
2. Click CMF icon to open the Music player. Then you will find a menu that shows
"SD/"MMC or "Flash" folder. Double-click the folder to play the related file. The
function of each icon is as follows: