TeleType Company 3300 GPS Receiver User Manual


 
Caution
Caution
3.Basic Operation
3.1.1 Power Supply
Tips
Tips
Under normal conditions, the battery can last
about 2~3 hours when the battery it is fully charged. The
actual time of power supply depends on how the device
is used. Some functions, like
audio/video playing and high backlight, use more battery
energy.
In addition to the built-in lithium battery, you may power the device using the
cigarette adapter cord or the AC power adapter.
When the device is not connected to the adapter, it is powered by the lithium
battery.
The icon at the top right corner on the device's main menu indicates
the current remaining power.
When the device is connected to the adapter, it is powered by the external
power source.
-7-
3.1.2 AC Adaptor
3.1.3 Charger
Vehicle
Use the AC adapter to charge the device before the first use.
1. Connect DC end of adapter to the power jack of device.
2. Connect the other end of adapter to the AC power jack.
When charging, the indicator is red, and the
power icon at the top right corner on the main menu is
the charge icon. After the device is fully charged, the
indicator turns green, and the power icon at the top
right corner on the main menu will be full.
Tips
Tips
1. Connect one end of the charger to the power input jack of the
device;
2. Connect the other end with the cigarette lighter adapter in order
to supply power and charge up at the same time.
Vehicle
Vehicle
To avoid damage to the device, insert the
charger only after starting the . If plugged
in before ignition, the sudden electric current at startup
could damage the GPS.
Vehicle Vehicle
3.2.2 Reset Key
3.2.4 SD/MMC Memory Card
3.2.1 Power Key
-8-
1. Turn on: Hold the power button for three seconds.
2. Turn off: Hold the power key for three seconds and it will show the message
POWER OFF MODE and then turn off.
3. Sleep mode: Press the power key for about one second, and the message,
ENTERING SLEEP MODE will display. Before the device enters sleep mode,
the indicator will be yellow. When you press the power key again, the GPS will
automatically turn on and display the last state. Then the indicator will go out.
In the unlikely event that the device needs to be reset, press the reset key on the
back of the device. The software and maps will remain on the system
undisturbed. You may need to Reset the system under the following conditions:
delay during menu mode switch; system unresponsive when attempting to click
the icons; power key unavailable.
Caution
Caution
Place the mount carefully. Do not block
the driver's view. Do not place the device arbitrarily
without attaching to the windshield. Do not place the
device in the way of the airbag or in the area where the
airbag would inflate in the event of a collision.
Vehicle
Caution
Caution
To avoid breaking the screen, protect the bottom
of the device from vibration by resting on the dash if
necessary.
3.2.3 Vehicle Mount
The mount consists of salver and bracket. While using the device in
the , make sure it is securely stowed in its mount on the windshield.
Vehicle
Vehicle
Your device has been specially equipped with a Secure Digital (SD) card
containing the navigation program and maps. Removal of the SD card will prohibit
you from using the navigation feature of the device. Should updating the device
be desired, you will be provided with a new SD card. To remove the SD card, push
the card towards the device, the card will then pop out and you will be able to
insert the new SD card instead.