Filter
Top Products
Click system icon in the main menu to set up your system, including volume,
power, brightness, date, time, language, time and date, system information,
touch screen calibration.
-15- -16-
4.6.3 Backlight Setting
Click Brightness to enter brightness setting menu. The user can adjust the
brightness by and or click or to set the time for automatic
screen power-off.
4.6.4 Date Time Setting
Click Date Timeto enter Date Time Setting menu. Status bar will show the time,
date and time zone you set.
Click time, date, time zoneto set up the time, date and time zone. You also
can click , or to set up the time, date and time zone.
Through the GPS signals, the time setting refreshes the current time
automatically. This means that the time will temporarily return to the factory
setting time after the system reset. As soon as the GPS begins to navigate, the
time will renew to the standard time. Please note that the time setting should be
compatible with the local time.
4.6.5 Language setting
Click Language icon to set the language you need.
There are 3 languages available: English, French and Spanish.
4.6.6. System Information
Click systemicon to view the detailed system information.
1. Clickcalibrationicon in the information box to adjust the touch screen.
Click the cursor in the middle of the touch screen as the following sequence
middle, left-up, left-down, right-down and right-up. Click the middle of the cursor
repeatedly until the calibration is successful. Then exit.
4.6.2 Power Setting
Click powericon to enter the power setting menu. The user can check the status
bar to view the power. The user can also click or to set the time to
automatically power off.
2. Click the "GPS Reset" icon in the information box, the system will automatically
clear up the Signal-to-Noise data received.
3. Click the "Factory Reset " icon in the information box, the system will
automatically restore factory settings.
4.6.1 Volume Setting
Click volumeicon to enter the volume setting menu. The user can click and
to adjust the volume. Tap the + to increase the volume.
Click “Enable sounds for taps” for a clicking sound when you touch the screen.
5. Technology Specification
Display
Precision
USB USB 2.0 full speed
Request
-20 -70
Temperature
Map
Update the map data in SD card
Version
Refreshing rate
Hot start:
3 sec, average
Warm start:
38 sec, average
Cold start: 43 sec, average
Position: < 10 meters
Start-up time
-157dBm
Sensitivity
20 channels
Channels
1575.42MHz
Frequency
GPS Module
320*240 RGB 65K color
Specification
3.5 TFT-LCD,3.5 4-line-resistance touch screen
Pixel
2-3 hours depending upon backlight usage
3.7V /1300mAH
Navigation time
INPUT DC
12-24V OUTPUT DC 5V /1.5A
Battery
INPUT AC
100-240V OUTPUT DC 5V /2A
Vehicle Charger
AC Adaptor
English French Spanish
Power
Languages
TXT
3 languages available
JPEG, BMP, PNG
E-book
MP3
WMA
WAV
Photo
ASF AVI MP4 3GP WMV
Audio
External Memory
Video
MAX 4G
SD/MMC
64M-2GB(SLC)
64M
NAND Flash
ARM9
application Processor@ 400MHz
SD RAM
Windows
CE5.0
CPU Frequency
OS
176g
System
106.5*78.5*25mm
Net Weight
Dimension
Media function
Power Saving
1/second
Automatically standby mode,screen
protection(black screen)