Filter
Top Products
Page 15
REMOTE VEHICLE STARTER INSTALLATION MANUAL
Ignition ON-OFF-ON-OFF-ON
Press & Release Program Button
Press Lock Button
Setting 1 Ignition Auto Lock
1) Ignition Lock & Unlock Enable 1 Flash/Honk Doors Lock/Unlock with Ignition key.
2) Ignition Lock Only 2 Flashes/Honks Doors Lock when ignition is turned ON only.
*3) Ignition Auto Lock Disable 3 Flashes/Honks Doors do not Lock/Unlock with Ignition key.
Press & Release the Program Button 1 Time (Setting 1) Confirmed with 1 LED flash.
Press & Hold the Program Button until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button to proceed to the next step.
Setting 2 Horn Honk Settings (Auxiliary Connector Pin 5)
1) Lock & Unlock chirps Disable 1 Flash/Honk Honks for Panic/Car Finder Only.
2) Lock & Unlock chirps Enable 2 Flashes/Honks Honks for Lock/Unlock/Panic/Car Finder Only
*3) All Chirps Enable 3 Flashes/Honks Honks for all features.
Press & Release the Program Button 2 Times (Setting 2) Confirmed with 2 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button to proceed to the next step.
Setting 3 Door Lock Options
1) Double Unlock Pulse 1 Flash/Honk .75 Second lock & 2 unlock pulses
2) 3 Second Lock & Unlock 2 Flashes/Honks 3 Second Lock & Unlock Pulses
*3) .75 Sec Lock & Unlock 3 Flashes/Honks .75 Second Lock & Unlock Pulses
Press & Release the Program Button 3 Times (Setting 3) Confirmed with 3 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button to proceed to the next step.
Setting 4 Door Unlock & Disarm Pulse Duration
1) Short Pulses 1 Flash/Honk 125ms pulses on Unlock & Disarm outputs
*2) Normal Pulses 2 Flashes/Honks 750ms pulses on Lock/Unlock & Disarm outputs
Press & Release the Program Button 4 Times (Setting 4) Confirmed with 4 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button to proceed to the next step.
Setting 5 Auxiliary Output Selection
1) Auxiliary Outputs 1 Flash/Honk Auxiliary Outputs activated
2) Auxiliary Without Unlock 2 Flashes/Honks Auxiliary Outputs without unlock output
3) Normal Operation 3 Flashes/Honks No Auxiliary Outputs
Press & Release the Program Button 5 Times (Setting 5) Confirmed with 5 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button to proceed to the next step.
Menu 1- User Settings