Filter
Top Products
7. OIL SENSOR INSTRUCTIONS
1. FUNCTION OF OIL SENSOR
The engine will stop automatically when the oil level falls below the safety limit. The engine
cannot be started unless the level is raised above the prescribed limit.
2. RESTARTING
1. Fill the crankcase with oil up to the proper level.
2. As for restarting and operating the engine, refer to section “4. OPERATING YOUR ENGINE”.
• Check the wire connector from the engine. It must be connected securely to the wire from oil sensor.
• When selecting the engine oil, refer to page 12 for the recommended oil.
8. SPARK ARRESTER
In a dry or wooded area, it is recommendable to use the engine with a spark arrester. Some areas require the use of a spark
arrester. Please check you local laws and regulations before operating your engine.
The spark arrester must be cleaned regularly to keep it functioning as designed. A clogged spark arrester:
• Prevents the ow of exhaust gas
• Reduces engine output
• Increases fuel consumption
• Makes starting difcult
If the engine has been running, the mufer and the spark arrester will be very hot. Allow the mufer to cool before cleaning the
spark arrester.
How to remove the spark arrester
1. Remove the ange bolts from the mufer cover and remove the mufer cover.
2. Remove the special screw from the spark arrester and remove the spark arrester
from the mufer.
Clean the spark arrester screen
Use a brush to remove carbon deposits from the spark arrester screen. Be careful to
avoid damaging the screen. The spark arrester must be free of breaks and holes.
Replace the spark arrester if it is damaged.
Install the spark arrester, and mufer protector in the reverse order of disassembly.
SPARK ARRESTER
SCREEN
SCREW
DEFLECTOR
MUFFLER
MUFFLER COVER
SPARK ARESSTER SCREEN