Subaru 2001 Legacy Automobile User Manual


 
4-10 Climate control
! AUTO button
FULL AUTO mode operation:
When the AUTO button is pressed, the
indicator light FULL AUTOon the display
illuminates. In this state, fan speed, air
flow distribution, air-inlet control, and air
conditioner compressor operation are
automatically controlled.
AUTO mode operation:
If you operate any of the buttons on the
control panel other than the OFF button,
rear window defogger button and tem-
perature control buttons during FULL
AUTO mode operation, the indicator light
FULL on the control panel will turn off
and the indicator light AUTO will remain
illuminated. You can then manually control
the system as desired using the button
you operated. To change the system back
to the FULL AUTO mode, press the
AUTO button.
! OFF button
The automatic climate control system
turns off (the air conditioner compressor
and fan turn off) when the OFF button is
pressed.
When the OFF button is pressed, the
outside air circulati on mode (air inlet
selection OFF) is automatically selected.
! Temperature control button
Drivers side
Passengers side
To increase the temperature setting, press
the
side of the temperature control