Filter
Top Products
3.3.4 Select Waypoint
In the navigation mode you can at any time set a Waypoint
to go to. The NAV Repeater will then compute the distance
and bearing to Waypoint and all other functions.The
Waypoint is selected by pressing the KEY in any
navigation mode. When the KEY is pressed the NMEA
Waypoint number is displayed. To enter your Waypoint,
press UP or DOWN, the text Lat/Lon is displayed. Press
KEY and the present position is displyed, edit the
latitudecoordinate for your Waypoint. To increase/decrease
a value, press UP/DOWN, to move to next character, press
MODE. When ready with latitude, press KEY to lock. Edit the
longitude the same way as for the latitude and lock with KEY.
3.3.5 Man Over Board (MOB)
You can at any time press the MOB buttons, which will store
a Waypoint called MOB WP. The display will show course,
bearing and distance to MOB WP. To clear the MOB
function, press UP and DOWN together. The MOB WP is
stored in memory and can be selected again at any
time. It will be erased when a new MOB is pressed or at
power off.
3.3.6 View the MOB position
You can display the MOB position in latitude/longitude by
pressing KEY in navigation mode, press UP/DOWN until
MOB WP is displayed and press KEY again. The latitude
and longitude cannot be changed for safety reasons.
3: FUNCTIONS English
8