Filter
Top Products
2.1 Installing the instrument
• Place the adhesive drill template on the desired location for the instrument.
Drill the four screw holes using a 2.8 mm (
7
/
64
”) drill for wood or 3.2 mm (
1
/
8
”)
for fibre glass. Use a 52 mm (2
1
/
16
”) hole saw to machine the clearance
hole for the instrument connection socket.
Note! Never drill through the instrument’s four mounting holes as the
gasket may be damaged and thus cause leakage. The warranty is not valid
for damage caused by drilling through the mounting holes.
2.2 Electrical installation
The connector is attached to the four pins on the reversed side of the
instrument. The 4-pole jack plug is colour coded
Important! Always connect both NMEA in and NMEA return. Connect NMEA
return to ground if the GPS has no NMEA return.
Connect a 3 Ampere fast fuse between power
battery and instrument on the plus lead.
2: INSTALLATION English
RED
BLACK
WHITE
YELLOW
PLUG FUNCTION CABLE
Green: +12 V Own cable
Yellow: NMEA RETURN Own cable
White: NMEA IN Own cable
Ground : Ground (0 V) Own cable
4