Filter
Top Products
10
4 Attach the cradle on the mounting
plate.
1Clean and dry the surface of the suction
cup.
2Press the center of the suction cup firmly
down on the mounting plate, then press the
lever.
3Holding the left knob*, tighten the right
knob.
*The left knob does not turn.
If you want to fix the cradle on the mounting
plate more securely to prevent risk of
dropping, use the supplied adhesive tape on
the suction cup.
Follow steps 2 to 5 of “About the suction
mount” on page 7, to complete the
installation.
x