Scytek electronic 3000Plus Series Automobile Alarm User Manual


 
Page 16 - Galaxy 3000 Plus
Entering System Programming
To enter System Programming:
1. Turn on ignition.
2. Within 5 seconds, press the valet switch 5 times.
· The siren will provide one long chirp, indicating that you have entered Programming.
3. Press the valet switch the number times equal to the System Parameter you want to change.
· The siren will chirp each time the valet switch is pressed.
4. Within 5 seconds, press the transmitter button corresponding to the desired operating mode for
that System Parameter.
· The siren will chirp to indicate the setting.
1 chirp = Button 1
2 chirps = Button 2
3 chirps = Button 3
5. When you are finished, turn off the ignition to save the changes.
Default Reset
Following this procedure will set all System Programming Parameters to factory default settings.
1. Enter System Programming.
2. Press Transmitter Button 3.
· The siren will chirp 6 times indicating that the reset signal was received.
· All System Programming parameters are now set to factory default settings.
· The Valet Mode is off.
· The Disarm Code is 1.
3. Turn off ignition.
Programmable System Options
The following is a description of the programming options of the system. Some of the program branches
control more than one option, and may require accessing a particular branch number twice in order to
program all desired features.
1. Arm Mode. Selects one of three modes: Manual Arming, Passive Arming, and Hands-Free Arming.
(
Requires optional Hands-Free transmitter, see Hands-Free transmitter manual for more details
)
2. Auto Rearming Mode. Allows the activation of either the Auto Rearming Mode or the Hands-Free
Immobilization feature. (
Requires optional Hands-Free transmitter, see Hands-Free transmitter manual
for more details
)
3. Arming Chirps. Selects between normal and silent operation.
4. Ignition Door Locking / Override Code Set. This dual program branch selects Ignition Door
Locking, and programs the optional Emergency Override Code.
I
gnition Door Locking. Selects whether or not the system will automatically lock the doors 5 seconds
System PProgramming