Filter
Top Products
7-50 Infotainment System
3. Say the name tag to be deleted.
The system responds with
“Would you like to delete, <name
tag>? Please say yes or no”.
.
If the name tag is correct,
say “Yes” to delete the
name tag. The system
responds with “OK, deleting
<name tag>, returning to
the main menu.”
.
If the name tag is incorrect,
say “No”. The system
responds with “No. OK, let's
try again, please say the
name tag.”
Using the Delete All Name Tags
Command
The delete all name tags command
deletes all stored phone book name
tags and route name tags for
OnStar (if present).
To use the delete all name tags
command:
1. Press and hold
b g for
two seconds. The system
responds with “Ready” followed
by a tone.
2. Say “Delete all name tags”. The
system responds with “You are
about to delete all name tags
stored in your phone directory
and your route destination
directory. Are you sure you want
to do this? Please say yes
or no.”
.
Say “Yes” to delete all
name tags.
.
Say “No” to cancel the
function and return to the
main menu.
Making a Call
Calls can be made using the
following commands:
.
Dial
.
Digit Dial
.
Call
.
Re-dial
Using the Dial Command
1. Press and hold
b g for
two seconds. The system
responds with “Ready” followed
by a tone.
2. Say “Dial”. The system responds
with “Dial using <phone name>”.
“Number please” followed by
a tone.
3. Say the entire number without
pausing.
.
If the system recognizes
the number, it responds
with “OK, Dialing” and dials
the number.