Filter
Top Products
To replace one of these bulbs:
1. Open the hood. See Hood Release on page 5-11.
2. Remove the bulb access cover from the bulb
(high or low-beam only) you need to change.
3. Turn the bulb socket counterclockwise and
pull it from the headlamp assembly.
4. Remove the electrical connector from the
bulb socket.
5. Pull the old bulb straight out of the bulb socket.
6. Push the new bulb straight into the bulb socket
until it connects.
7. Reconnect the bulb socket to the electrical
connector.
8. Push the bulb socket into the headlamp assembly
and turn it clockwise to lock it into place.
9. Reinstall the bulb access cover.
5-43