Filter
Top Products
Setting the Clock
Your vehicle has a radio with a H (clock) button for
setting the time and date.
To set the time and date, follow these instructions:
1. Turn the radio on.
2. Press the
H button and the HR, MIN, MM, DD,
YYYY (hour, minute, month, day, and year)
displays.
3. Press the pushbutton located under any one of the
labels to be changed. Every time the pushbutton is
pressed again, the time or the date if selected,
increases by one.
• Another way to increase the time or date, is to
press the right
¨SEEK arrow or \FWD
(forward) button.
• To decrease the time or date, press the left ©
SEEK arrow or sREV (reverse) button, or
turn the
f knob, located on the upper right side
of the radio.
The date does not automatically display. To see the
date press the
H (clock) button while the radio is
on. The date with display times out after a few seconds
and goes back to the normal radio and time display.
To change the time default setting from 12 hour to
24 hour or to change the date default setting from
month/day/year to day/month/year, follow these
instructions:
1. Press the
H button and then the pushbutton
located under the forward arrow label. Once
the time 12H and 24H, and the date MM/DD/YYYY
(month, day, and year) and DD/MM/YYYY (day,
month, and year) displays.
2. Press the pushbutton located under the desired
option.
3. Press the
H button again to apply the selected
default, or let the screen time out.
3-57