Filter
Top Products
Windshield Wiper Lever
The lever on the right side of the steering column
operates the windshield wipers.
7 (Mist): Pull the lever down and release it for a
single wiping cycle. The lever will return to its original
position. For more cycles, hold the lever down before
releasing it.
9 (Off): Put the lever in this position to turn off
the wipers.
& (Delay): Put the lever in this position to set a delay
between wipes. Turn the end of the lever to set the
length of the delay.
6 (Low Speed): Put the lever in this position for
slow, steady wiping cycles.
1 (High Speed): Put the lever in this position for
rapid wiping cycles.
Be sure to clear ice and snow from the wiper blades
before using them. If they’re frozen to the windshield,
gently loosen or thaw them. If the blades do become
damaged, install new blades or blade inserts.
Heavy snow or ice can overload the wiper motor. A
circuit breaker will stop the motor until it cools down.
Clear away snow or ice to prevent an overload.
3-9