Filter
Top Products
EB 8331-1 EN 3
Safety instructions
General safety instructions
4
Assembly, start-up and operation of this device may only be performed by
trained and experienced personnel familiar with the product.
According to these mounting and operating instructions, trained personnel
refers to individuals who are able to judge the work they are assigned to
and recognize possible hazards due to their specialized training, their
knowledge and experience as well as their knowledge of the applicable
standards.
4
Any hazards which could be caused in the connected valve by the process
medium, operating pressure or moving parts are to be prevented by means
of the appropriate measures.
4
The actuators has been designed for use in electrical power installations.
For wiring and maintenance, you are required to observe the relevant safety
regulations. The actuator must be protected against unintentional
reconnection of the power supply.
Take special care when making adjustments on live parts. Do not remove
any covers!
4
Proper transportation and storage are assumed.