Filter
Top Products
Sometimes the motor
bike doesn’t run, but
other times it does
Motor bike does not
stop when applying the
brake
Motor bike makes
loud noises or grinding
sounds
Need Help? Visit our web site for updates and a list of authorized service centers at www.razor.com or call toll-free
at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
Problem Possible Cause Solution
Loose wires or connectors
Motor or electrical switch damage
Brake is not adjusted properly
Chain is too dry
Check all wires around the motors and all connectors to make sure
they are tight.
Contact your local Razor authorized service center for diagnosis and
repair.
Refer to instructions on page 4 of this manual to properly adjust
brake.
Apply a lubricant such as 3 in 1
TM
or Tri-Flow
TM
to the chain.
TROUBLESHOOTING GUIDE
8